Hitachivina

H-MSP-201 Multi Plate Screw Press

  • Model: H-MSP-201
  • Temperature (℃): 5 ~ 40℃
  • pH value: 6 ~ 9
  • D.S. Capacity: 9 ~ 15 kg-DS/h
  • Equipment Dimension 2906×964×1335 (mm)
  • Net Weight: 500 kg

Description

H-MSP-201 Multi Plate Screw Press developed by HITACHI utilizes the dewatering principles of force-water homo-direction,thin-layer dewatering, proper pressure, and extension of the sludge dewatering path.

The new equipment, more advanced than the traditional dewatering equipment which is easily blocked, unsuitable for low-concentrated sludge and oily sludge, of high consumption, and difficult to operate, will eliminate these problems and are of higher efficiency and power saving.

Multi plate screw press, which is controlled by the electric control cabinet, allows automatic continuous operation of sludge flocculation, thickening, dewatering, and filtrate discharging.

Technical Specifications Sheet

Model

H-MSP-201 Multi Plate Screw Press

Items:

Specifications

Design Site

Conditions

Temperature (℃)

5 ~ 40℃

Feed Sludge Concentration

5,000 mg/L ~ 50,000 mg/L  (solid content: 0.5% ~ 5%)

pH value

6 ~ 9

Design Parameters

D.S. Capacity

9 ~ 15 kg-DS/h
Outlet Moisture Content ~ 80%

Polymer Dosage

3 ~ 6 g-PAM / kg-DS  (PAM Solution Concentration:0.1% ~ 0.2%)

Flocculation

& Mixing

Tank

Dimension

981×632×847 (mm)

Volume

220L

Filter Screen

A filter screen is set to stop matters that are larger than 1cm from going into the dewatering drum.

Dewatering Body

Screw, Diameter × Length

φ200×1900mm

Screw, Qty.

1

Screw, Material

0Cr18Ni9, special surface welding super hard wear-resistant alloy process

Dewatering

Motor

Characters

IP55 CCC Frequency Inverter Control

Power & Qty.

0.25 kW×1

Mixing Motor

Character

IP55 CCC  Frequency Inverter Control

Power & Qty.

0.37 kW×1

Control Cabinet

Protection Class

IP54

Function

Automatic & manual control, including screw press, motors, mixer

Sludge Inlet Pipe

DN40  PN1.6MPa, Direct Nozzle

Polymer Inlet Pipe

DN20  PN1.6MPa, Direct Nozzle

Filtrate Discharge pipe

DN80  PN1.0MPa, Internal Thread Nozzle

Sludge Return Pipe

DN80  PN1.6MPa, Direct Nozzle

Total Power

0.7 kW (380V, 3 Phase, 50Hz)

Equipment Dimension

2906×964×1335 (mm)

Net Weight

500 kg

Operating Weight

850 kg

OUR RESEARCH

Hitachi, as the industry leader and first brand of Multi-plate Screw Press, have the strongest R&D capability, most application cases, largest production capacity, richest product lines, and highest recognition from professional users.

Hitachi built the finite element model according to HITACHI screw shaft pressing theory, which basically solved the problems of product design, technical innovation, and equipment operation. On the basis of the advanced model.

Hitachi successfully developed the following significant technology innovations:

  • 400 Series Screw Shaft (Industry First)
  • Wear-free type of Multi-plate Screw Press (Industry First)
  • Special screw shaft for Sludge Thickener (Industry Only)
  • Special screw shaft and machine for inorganic material (Industry Only)
  • Special screw shaft and machine for petrochemical, pectin, paper industry (Industry Only)

TECHNICAL ADVANTAGES

For its special structure, accurate design, and processing, Hitachi Multi-plate Screw Press is characterized by
the following features:

-The exclusive pre-thickening device enables a wide solid concentration ranging from 3000mg/l to 50000mg/l

The thickening zone and the dewatering zone make the machine applicable to both highly concentrated sludge and that with high water content. It’s able to directly treat sludge with a solid content from 3000mg/l to 50000mg/l.

The exclusive pre-thickening device enables excellent performance while dewatering sludge with high water content

  • The problems of gravitational thickening disappear and highly efficient thickening is achieved.
  • Flocculating and thickening at the same time reduce the subsequent dewatering pressure.
  • Adjusting the expansion valve to make the sludge in the best state for dewatering.

-Fixed and moving plates replace filter cloth, self-cleaning, clog-free, easy to handle oily sludge

The traditional dewatering equipment is easily blocked while the multi-plate screw press allows continuous operation with no blocking due to the moving of the fixed rings and the moving ring cleans itself. Therefore, it’s especially good at oily sludge with excellent performance. Moreover, it doesn’t need additional water for high-pressure clean-
ing so that no smell or secondary pollution will be produced.

The dewatering of the multi-plate screw press relies on the inner pressure of the filter chamber and the rotating speed is as slow as 2–4 r/min. Therefore, its power consumption is as low as 0.01-0.1 kw/h/kg-Ds, only 1/8 of that of belt presses and 1/20 of that of centrifugal machines. In addition, of course, there is little noise. Eventually, the operating cost can be greatly saved.

Hitachi Filter Press Company is the leading mud press manufacturer in Vietnam, we are committed to providing you with quality, competitively priced, long-term warranties. If you want to buy a mud press, please contact Hotline: 0274 626 8087.

HITACHI PRESSER FILTERS COMPANY
Hotline: 0931 777 202
The Factory: Road DH 619, Long Nguyen Commune, Bau Bang District, Binh Duong
Southern Office: 135C My Phuoc Tan Van Street, An Phu Ward, City. Thuan An, Binh Duong
Northern Office: 9th Floor, Minori Building, No. 67A Truong Dinh Street, Truong Dinh Ward, Hai Ba Trung District, Hanoi City
Central Office: 20th Floor, Indochina Riverside Towers, No. 74 Bach Dang Street, Hai Chau District, Da Nang