Description
H-MSP-132 Multi Plate Screw press is more advanced than traditional dewatering systems which can be easily blocked by low concentrated sludge. Multi Plate Screw press allows for automatic continuous sludge flocculation, thickening, dewatering and filtrate discharging. The thickening zone allows the system to process both highly concentrated sludge as well as sludge with a high water content.
Technical Specifications Sheet
| Model： | H-MSP-132 Multi Plate Screw Press | |
| Items: | Specifications | |
| Design Site
Conditions |
Temperature (℃) | 5 ~ 40℃ |
| Feed Sludge Concentration | 5,000 mg/L ~ 50,000 mg/L (solid content: 0.5% ~ 5%) | |
| pH value | 6 ~ 9 | |
| Design Parameters | D.S. Capacity | 12 ~ 30 kg-DS/h |
| Outlet Moisture Content | ~ 80％ | |
| Polymer Dosage | 3 ~ 6 g-PAM / kg-DS (PAM Solution Concentration：0.1% ~ 0.2%) | |
| Flocculation
& Mixing Tank |
Dimension | 981×642×847 (mm) |
| Volume | 220L | |
| Filter Screen | A filter screen is set to stop the matters that are larger than 1cm going into the dewatering drum. | |
| Dewatering Body | Screw, Diameter × Length | Φ168×1660 mm |
| Screw, Qty. | 2 | |
| Screw, Material | special surface welding super hard wear-resistant alloy process | |
| Dewatering
Motor |
Characters | IP55 CCC Frequency Inverter Control |
| Power & Qty. | 0.18 kW×2 | |
| Mixing Motor | Character | IP55 CCC Frequency Inverter Control |
| Power & Qty. | 0.37 kW×1 | |
| Control Cabinet | Protection Class | IP54 |
| Function | Automatic & manual control, including screw press, motors, mixer | |
| Sludge Inlet Pipe | DN40 PN1.6MPa, Direct Nozzle | |
| Polymer Inlet Pipe | DN20 PN1.6MPa, Direct Nozzle | |
| Filtrate Discharge pipe | DN80 PN1.0MPa, Internal Thread Nozzle | |
| Sludge Return Pipe | DN80 PN1.6MPa, Direct Nozzle | |
| Total Power | 0.73 kW (380V, 3 Phase, 50Hz) | |
| Equipment Dimension | 2715×1128×1360 (mm) | |
| Net Weight | 608 kg | |
| Operating Weight | 891 kg | |
Main Features
1.Small occupation, saving space: compared with traditional ones, our company’s spiral extruded sludge thickener adopts combined assembly type, which is easy for installation and saves space.
2.Save rinse water: spiral extruded sludge dehydrator is equipped with moving ring, and the moving and static rings overlap each other during operation. The moving ring that moves in a circular motion driven by spiral shaft has the function of automatically cleaning the filter slit. Therefore, the rings can be cleaned up with minimal water consumption. The water consumption of spiral extruded sludge thickener is less than one percent of that of other thickening equipment.
3.Simple operation and maintenance: spiral extruded sludge thickener can achieve 24 hours unattenuated operation through a variety of sensors. In the event of a malfunction, it will automatically give an alarm and shut down.
4.Suitable for sludge thickening of low concentration: spiral extrusion sludge thickener can be used for sludge within the range of 0.2%~2%. The concentration of the thickened sludge can reach more than 5%.
Multi Plate Screw press DDTP-MSP-132 belongs to the screw press, it’s clog-free and can reduce the sedimentation tank and sludge thickening tank, saving the cost of sewage plant construction.
- Exclusive pre-thickening device enables a wide solid concentration ranging from 3000mg/l~50000mg/l
- Fixed and moving plates replace filter cloth, self-cleaning, clog-free, easy to handle oily sludge
- Low running speed, low noise, low power consumption, 1 /8 of Belt Press and 1 /20 of centrifuge
- Less capital construction cost, more excellent working performance
- Fully automatic control, Easy operation and simple maintenance
Widely Use
- Applicable sludge concentration of 2000mg/L-50000mg/L.
- Most especially for the oily sludge.
Fully Automatic Control
Combining with the auto control system, the machine runs very safely and simply and can be programmed according to the requirement of the users. It can operate automatically for 24 hours, unmanned.
Low Running Cost
- Power-use: less than 5% of centrifuge.
- Water-use: less than 0.1% of belt filter press. Polymer: saving around 60%.
- Room: saving more than 60% of the investment for dehydration room.
Non-clogging
- Self-cleaning with small amount of water.
- Suit for Oily Sludge
No secondary pollution
- The screw shaft rotational speed about 2~3r/min, no vibration and noise is very small .
- Only need a small amount of water for self-cleaning, no secondary water pollution.
- Sludge runs at a slow operating
Hitachi Filter Press Company is the leading mud press manufacturer in Vietnam, we are committed to providing you with quality, competitively priced, long-term warranties. If you want to buy a mud press, please contact Hotline: 0274 626 8087.
