Hitachivina

HYB250 Piston Pump

  • Model: HYB250
  • Power: 30 M3/H
  • Pressure: 0-2.5 Mpa
  • Flush times: 18 r/min
  • Piston journeys: 250 mm
  • Toltal weight: 1400 kg
Category:

Description

HYB250 Piston Pump is a popular piston pump line in Vietnam. With the ability to pump mud with many different liquids, pump with high pressure, operate on the principle of half a suction cycle and half a push cycle to compress the mixture out through the discharge port. Currently in Vietnam, piston pumps manufactured by Hitachi Filter Press Company are highly appreciated by investors for their quality and diverse designs.

THÔNG SỐ KỸ THUẬT

Model
Power Pressure Flush times Piston journeys
Motor Power
Toltal weight Dimensions
m3/h Mpa r/min mm G D V kg mm
HYB85 3 0-2.5 15 220 4 420 1215X850X1500
HYB120 7.1 0-2.5 24 250 11 850 1580X1000X1600
HYB140 10 0-2.5 26 250 15 11 15 900 1580X1000X1600
HYB200 19 0-2.5 22 250 18.5 15 15 1200 1690X1230X1900
HYB250 30 0-2.5 18 250 22 18.5 1400 1950X1300X2200
HYB300 36 0-2.5 15 300 30 1600 2050X1600X2100

INTRODUCTION PITSON YB

Pump YB hydrodynamic piston pump is hydraulically controlled on single and double cylinders, this is a highly appreciated pump for its stable pumping ability, no noise, pressure fluctuations, pump size Small, diverse, significantly lighter in weight than other pump lines.

Piston pump is mainly used to pump all kinds of slurry, liquid, can also be used for coal slurry, pump domestic water. Piston pump is driven by hydraulic pressure, Piston is made of anti-corrosion alumina, piston pump is divided into 3 types including:

  • High
  • pressure slurry pump Low pressure slurry
  • pump and Variable pump

HIGHLIGHTS FEATURES OF PISTON PUMP

The pump is wear-resistant

With the design of Piston fired by aluminum porcelain, after fine grinding, HLC hardness 8.5 or more, 0.4um rough surface. The plunger will not break the characteristics of the slurry, suitable for conveying slurry containing sand and solid particles.

Pump with high pressure

Piston and vacuum pump distance, lift 0-6m (but mud characteristics will also affect lift force)

Adjustment constant Sludge pressure and oil flow automatically change

The working pressure of the pump can be adjusted in the range of 0-20 kg. The adjusted pressure will not be changed by the change of pump discharge rate, it will be maintained, unaltered even if its sludge discharge is interrupted while the pump is running. (The flow variation should not exceed the maximum throughput, but the flow may be zero).

High pressure and high efficiency

The maximum pressure of the conventional model is 20 kg. At the same pressure (≥ 5 kg) and same flow rate, this piston pump motor power is 1 to 2 models smaller than other pumps

Easy operation

Tighten or relax the pressure regulating valve to adjust Adjust pressure, then lock tight, no need to adjust in the future.

Low cost of use

The parts that are easy to wear out are the valve plate and the water seal. Normally, their replacement time is 3-6 months, for urban sludge, their replacement time is longer from 6-12 months.

Piston pump life Piston

Pump has a very long life, more than 15 years

HITACHI SUPPLY HIGH QUALITY PISTON YB PUMP

As one of the companies in Vietnam specializing in manufacturing and distributing Industrial Pumps, Hitachi Filter Press Company is now a manufacturer of piston Pumps which are highly appreciated for their quality. .

Our piston pumps are widely applied in many fields, manufactured on modern technological lines according to European standards. With a closed production system, the equipment is specially manufactured, using anti-corrosion materials, increasing pump life.

With a team of experienced consultants, we understand the characteristics of all types of sludge today, in addition, choosing the right pump is always the standard for us to work with customers. Therefore, customers are completely assured when choosing our services.

Hitachi is committed to selling YB piston pump with low price, high quality, long-term warranty. Our pump is always available at the warehouse, you can come to the place to visit and buy. For customers who are far away, we receive shipping and delivery to your place. Consultancy contact: 0274 626 8087.

HITACHI PRESSER FILTERS COMPANY
Hotline: 0931 777 202
The Factory: Road DH 619, Long Nguyen Commune, Bau Bang District, Binh Duong
Southern Office: 135C My Phuoc Tan Van Street, An Phu Ward, City. Thuan An, Binh Duong
Northern Office: 9th Floor, Minori Building, No. 67A Truong Dinh Street, Truong Dinh Ward, Hai Ba Trung District, Hanoi City
Central Office: 20th Floor, Indochina Riverside Towers, No. 74 Bach Dang Street, Hai Chau District, Da Nang